Default Macro Functions - Yamaha RX-V3800 Owner's Manual

Remote control features

Default macro functions

Pressing macro
button
STANDBY
POWER
XM
NET/USB
TUNER
CD
CD-R
MULTI CH IN
MD/TAPE
DVD
BD/HD DVD
PHONO
DTV/CBL
DVR
VCR
V-AUX/DOCK
*1 You can turn on some components (including Yamaha components) connected to this unit by connecting them to the AC
OUTLET(S) on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component. For
details, refer to the operating instructions for the connected component.
*2 When the remote control code for your TV is set up for either DTV/CBL or PHONO (see page 107), you can turn on the power of
your TV without selecting an input source. The remote control code set up for DTV takes priority over the one for PHONO.
*3 When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4 Playback can be started for any Yamaha remote control-compatible MD recorder, CD player, CD recorder, DVD player, Blu-ray
Disc player, HD DVD player or DVD recorder. When using macros to operate other components, you will need to program the play
button on the input area of that component (see page 109) or set a remote control code (see page 107) in advance.
112
En
To automatically transmit these signals in order
First Second
STANDBY
(*1)
POWER
POWER
POWER
MULTI CH IN
POWER
BD/HD DVD
(*1)
DTV/CBL
V-AUX/DOCK
—
(*2)
POWER
TV
XM
NET/USB
(*3)
TUNER
CD
(CD area) (*4)
CD-R
(CD-R area) (*4)
MD/TAPE
(MD/TAPE area) (*4)
DVD
(DVD area) (*4)
(BD/HD DVD area) (*4)
PHONO
DVR
(DVR area) (*4)
VCR
(VCR area) (*4)
Third
—
—
—
—
—
—
—
—
—