Multi Mode - Yamaha MU50 Owner's Manual

MULTI MODE

Multi Mode
In the Multi mode, the MU50 performs as a multi-timbral tone generator capable
of playing up to 16 Parts simultaneously, over 16 MIDI channels. Normally, the
MU50 should be set to Multi mode when using it with a sequencer and General
MIDI song data. There are four Multi modes: XG, TG300B, C/M and DOC. Each
mode provides compatibility with different music software and hardware as de-
scribed below:
Provides compatibility with the XG format.
XG:
TG300B: Provides semi-compatibility with the GM Level 1 standard.
Provides semi-compatibility with computer music software.
C/M:
Provides compatibility with DOC music software for the Yamaha
DOC:
Clavinova.
NOTE
When set to the TG300B TG300B TG300B TG300B mode, the MU50 may not be able to play TG300-specific song data with complete
TG300B
accuracy. However, MIDI data designed for other computer music tone generators is compatible with the MU50.
To set the Multi mode:
1 Press the MODE
2 Use theg VALUE
XG, TG300B, C/M or DOC.
3 Press the EXIT
The currently selected mode setting is shown by the arrow at the bottom
right of the display.
34
MODE button. MODE MODE
MODE
VALUE w buttons to select the desired Multi mode: VALUE VALUE
VALUE
EXIT EXIT button or the PLAY EXIT EXIT PLAY button to return to the Play display. PLAY PLAY PLAY
Indicates currently selected mode.