Ibm Pc And Clones - Yamaha MU50 Owner's Manual

GUIDED TOUR
Operation
1 Set the HOST SELECT
2 Connect the MU50 to the host computer, as shown in the illus-
tration above. Use a standard Macintosh cable (8-pin Mini DIN
on both ends; see page 31).
3 Turn on the the host computer, then the MU50.
4 Start up your music software, and set up the appropriate options
on the software for operation with the MU50.
The options you may have to set include:
MIDI Interface Type
Clock
Other options and settings may have to be made as well. Refer to the own-
er's manual of your particular music software for more information.

IBM PC and Clones

Follow these instructions if you have an IBM PC/AT or compatible computer
not equipped with an external MIDI interface. Connect the TO HOST termi-
nal on the MU50 to one of the computer's serial ports, COM 1 or COM 2.
IBM PC/AT or Compatible Computer
NOTE
Your music software must be able to recognize the TO HOST
Yamaha dealer for more details. If your software is not compatible, you can still use the
MU50 by installing a MIDI interface (internal card or external) to the computer.
26
HOST SELECT switch to Mac HOST SELECT HOST SELECT HOST SELECT
Standard MIDI Interface
1 MHz
Serial Port
Mac. Mac Mac Mac
TO HOST connection. Consult your TO HOST TO HOST TO HOST