Specifications; Ec Declaration Of Conformity - Makita DFT043F Instruction Manual

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Front lamp
5-1. LED indicator
6-1. Adjust grip

SPECIFICATIONS

Fastening torque
No load speed (min
Dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
6-2. Ring
7-1. Adjust ring
7-2. Ring
7-3. Scale
7-4. Adjust grip
7-5. Hole for adjust grip
7-6. Yellow line
7-7. Compression spring
Model
Hard joint
Soft joint
-1
)
Net weight
Rated voltage
) : 70 dB (A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
DFT043F
1 - 4 N•m
1 - 4 N•m
80
ENE033-1
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
ENG905-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

ENG900-1
We Makita Corporation as the responsible manufacturer
sum)
declare that the following Makita machine(s):
Designation of Machine:
Cordless Screwdriver
Model No./ Type: DFT043F,DFT083F,DFT125F
are of series production and
Conforms to the following European Directives:
ENG901-1
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
3
9-1. Bit
9-2. Sleeve
10-1. Bit-piece
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
DFT083F
3 - 8 N•m
3 - 8 N•m
80
200 mm x 72 mm x 255 mm
1.5 kg
D.C. 14.4 V
DFT125F
5 - 12 N•m
5 - 12 N•m
150
ENH101-14