Fax Parameters; Access To Fax Parameters; Description Of The Tab Logs And Reports; Description Of The Tab Fax Parameters - Xerox Phaser 3100MFP/X User Manual

Phaser 3100MFP/X

Fax parameters

Access to fax parameters

1 Click on the icon
D .
IRECTOR
2 Select T > O
OOLS PTION
3 Make the adjustments required, referring to the
description of parameters below and click OK.
Description of the tab L
Option
Automatic printing
The fax is automatically printed
of a received
when received.
document
Printing of a inbox A report is printed out for each
report fax received.
The log is printed automatically
Printing of inbox log
when its contents fill a page.
Automatic printing The fax is automatically printed
of a sent document when it is sent.
Printing of an An outbox report is printed after
outbox report each fax is sent.
Printing of the The log is printed automatically
outbox log when its contents fill a page.
of the window MF
> F .
AX
R
OGS AND EPORTS
Description
Description of the tab F
Option
Transmission
speed
Line number
Dialling prefix
Type of dialing
Header
ECM
Number of attempts
Interval between
attempts
- 71 -
P
AX ARAMETERS
Description
Fax default transmission
speed.
Number of the line where your
machine is connected.
This dialling prefix will be
automatically inserted in front
of the number before sending
on this line.
Must be programmed
according to the type of
switchboard your machine is
connected to.
Displays a Communication
Identification Line (CIL) on the
documents you send or on the
documents you receive.
Corrects communication errors
due to line disturbance. This
option ensures that received
documents are legible. On the
other hand, communication
times may be longer if the line
is bad.
Number of attempts the
machine must make if send
fails to contact a recipient.
Duration between two send
attempts.