Customising Telephony Settings; Unregistering Dect Handset - Xerox Phaser 3100MFP/X User Manual

Customising telephony settings

This function lets you set the handset ringing time upon
call reception.
This parameter, used to define for how long the
handset(s) rings before terminating a call, is by default set
to 30 seconds.
This menu is available only if the
USB-DECT base is connected to the
Important
machine.
893 - ADVANCED FCT / DECT / RINGING TIME
1 Press , enter 89 using the keypad. Confirm
with OK.
2 Select RINGING TIME using the
and confirm with OK.
3 Enter the desired time in seconds (15 to 60) using
the numerical keypad.
4 Confirm with OK.
5 To exit this menu, press

Unregistering DECT handset

This function is used to unregister a handset from the
DECT base. You will no longer be able to make or receive
calls with a handset once you unregister it.
This menu is available only if the
USB-DECT base is connected to the
Important
machine.
892 - ADVANCED FCT / DECT / UNREGISTER
1 Press , enter 89 using the keypad. Confirm
with OK.
2 Select UNREGISTER using the
confirm with OK.
The LCD screen displays the list of handsets
registered to the DECT base.
3 Select the handset to unregister using the
button and confirm with OK.
4 Confirm with OK.
5 To exit this menu, press
or button
.
or button and
or
.
- 56 -
Phaser 3100MFP/X