Cisco Catalyst 3850 Hardware Installation Manual page 114

Configuring Your Device Based on a Site Profile
Setting
Error Disable Recovery
Port Channel Load Balance
SSH
SCP
VTY Access to Switch
Mitigate Address Spoofing
Service Timestamp
Management Interface
QoS Policy
Uplink Interfaces
Downlink Interfaces
Cross-connect Interfaces
Catalyst 3850 Switch Hardware Installation Guide
100
Standalone Core Switch (with
ECMP Peers)
Recovery mode set to Auto
Source Destination IP
Version 2
Enabled
Enabled
Unicast RPF (uRPF) in strict mode
Enabled
Layer 3 settings configured on the
management port, based on Quick
Setup
QoS Policy for Distribution/Core
defined
Selected uplink ports connect to
MAN/WAN device
Downlink connections to access
switches
Selected ports connect to other core
switches
Configuring the Switch
Standalone Collapsed Core Switch
(with ECMP Peer and Port Channel
Downlink)
Recovery mode set to Auto
Source Destination IP
Version 2
Enabled
Enabled
Unicast RPF (uRPF) in strict mode
Enabled
Layer 3 settings configured on the
management port, based on Quick
Setup
QoS Policy for Distribution/Core
defined
Selected uplink ports connect to
MAN/WAN device
Downlink connections to
distribution switches
Selected ports connect to other core
switches
OL-26779-05