3.3. Mechanical Specification
3.3.1.
DT-970
The mechanical specification (dropping impact, vibration resistance) of the DT-970 Series (all models) is
as follows:
Table 3-7 Mechanical Specification
Item
Dropping impact
Vibration resistance
3.3.2.
USB cradle HA-N60IO
The mechanical specification (dropping impact, vibration resistance) of the USB cradle (HA-N60IO) is as
stated in the table below.
Table 3-8 Mechanical Specification
Item
Dropping impact
Vibration resistance
3.3.3.
LAN cradle HA-N62IO
The mechanical specification (dropping impact, vibration resistance) of the LAN cradle (HA-N62IO) is as
stated in the table below.
Table 3-9 Mechanical Specification
Item
Dropping impact
Vibration resistance
Specification
2.0m
6 sides and 4 corners, one time each, onto concrete
Fit the packaged batteries (LR6) and eneloop batteries in
place
1.5G or less
10 to 55Hz, XYZ directions, 30 minutes round trip
Power On (display light only)
Specification
75cm
6 sides, one time each, onto concrete
1.5G or less
10 to 55Hz, XYZ directions, 30 minutes round trip
With power on but not communicating
Specification
75cm
6 sides, one time each, onto concrete
1.5G or less
10 to 55Hz, XYZ directions, 30 minutes round trip
With power on but not communicating
26
Conditions
Conditions
Conditions