Casio DT-970 Series Hardware Manual page 14

Table 1-6 Part Names and Functions
No Name
1 Port for USB client
2 Port for USB host
3 Power switch
4 Toggle switch
5 LAN connection status
indicator LED
6 LAN communications status
indicator LED
7 LAN port
8 AC adapter jack
9 Switch for detecting unit
placement
10 Power supply terminal
11 Data communication terminal
12 Power indicator LED
13 Hook for fastening the
DT-970
Use a USB cable (DT-380USB-A) to connect to a PC, then transfer
system data and file data. Before connecting to a PC, it is necessary
to install a specific driver on the PC side.
Use this for connecting to compatible USB peripherals.
This switch turns the power On/Off.
This switch changes between USB and LAN.
LAN : LAN
A : USB host
B : USB client
This displays LAN connection status.
Light off : The LAN cable is not connected correctly.
Lit in green : The LAN cable is connected correctly.
This displays LAN operation status.
Light off : No communication in progress
Lit in green : Communicating
Use a LAN cable to connect to a PC or hub, then transfer system
data and file data.
Connect an AC adapter (sold separately) to supply power
This switch detects that the DT-970 is connected correctly.
This terminal supplies power to the DT-970.
This is a terminal for data communications.
This indicates power status and the mounting status of the DT-970.
Lit in red : Power On
Lit in green : The DT-970 is mounted correctly.
Fasten the DT-970.
13
Content