HIKVISION DS-2CD2xx2-I Quick Manual

Active IP Device by Creating Strong Password
how to Active IP Device by Creating Strong Password
Before you can log into the device properly, you must create a password for the administrator user
"admin" of the device to activate it. Activation via Local GUI, Activation via Web Browser, Activation via
SADP, and Activation via Client Software are all supported. Follow the steps below to activate the device.
** This function should be supported by the devices.
- IP Cameras FW,

DS-2CD2xx2-I:
- DVR FW,

DS-7200HWI-HK, DS-7300HWI-HK:
- Turbo HD DVR FW,

DS-7200HQHI-HK, DS-7300HQHI-HK, DS-8100HQHI-HK:
- NVR FW,

DS-7600NI-PHK:

DS-7700NI-PHK, DS-8000HFI-HK, DS-9000HWI-ST, DS-9600NI-ST:

Activation via Local GUI (Only Supported by Back-End Devices: DVR/NVR)
Steps:
1. Power on the DVR/NVR.
2. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED – We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including upper case letters, lower case letters,
numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
This Quick Guide is going to introduce
V5.3.0 Build150513 or Above
V3.1.4 Build150430
V3.0.15 Build150528 or Above
or Above
V3.1.7 Build150515 or Above
V3.3.1 Build150423 or Above
V20150706
1