Makita DUB363 Instruction Manual page 6

2. Align the protrusion on the blower pipe with the
groove on the end nozzle, then attach the end nozzle to
the blower pipe, and then turn the end nozzle to lock it
into place.
► 1. End nozzle 2. Blower pipe
To remove the blower pipe and end nozzle, perform the
installation procedure in reverse.
NOTE: The length of the nozzle can be changed by
moving the nozzle as shown in the figure.
1
► 1. End nozzle 2. Blower pipe
2
1
2
6 ENGLISH
Installing or removing flat nozzle or
extension nozzle
Optional accessory
Attach the flat nozzle or extension nozzle to the end
nozzle, and then turn it to lock it into place.
1
2
► 1. Flat nozzle 2. Extension nozzle 3. End nozzle
You can also attach the flat nozzle or extension nozzle
to the blower pipe.
1
2
► 1. Flat nozzle 2. Extension nozzle 3. Blower pipe
To remove the flat nozzle or extension nozzle, perform
the installation procedure in reverse.
3
3