Figure 4
Partially reinstall the cap nut, rotating about 3 turns so that there is a space of about 1/8 inch (3 mm)
Step 7
between the bottom of the cap nut and the top of the DFC3 daughter card, as shown in
nut acts as a stop when you unseat the daughter card connector so that the DFC3 daughter card does not
move horizontally and cause damage to the base board.
Catalyst 6500 Series Distributed Forwarding Card 4 for WS-X68xx, WS-X69xx, and Select WS-X67xx Modules Installation Note
OL-24918-02
Removing the DFC3 Daughter Card Installation Hardware
WS-X5530
Removing a CFC or DFC3 Daughter Card
Installation
bracket. May
or may not
be present.
Figure
5. The cap
15