Figure 7-16 Connecting A Multiline Terminal To The System - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
I
S 4
NSTALL
ECTION
4.1
System Hardware Manual
M T
ULTILINE ERMINALS
Connecting the DT300 Series Multiline Terminal to the System
This instruction applies to all DT300 Series Multiline Terminals.
1. Plug the telephone cord into the modular jack on the bottom side of the
Multiline Terminal. The handset is also attached to the bottom side of
the Multiline Terminal.
Multiline Terminal
Line

Figure 7-16 Connecting a Multiline Terminal to the System

Headset
Issue 1.0
Handset
7 - 21