Figure 5-101 Opening Chassis Access Panel (Chs1U-Us Chassis); Figure 5-102 Chassis Access Panel Removed - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
5 - 74
3. Swing access panel outward and unplug fan power cable. See
Figure 5-101 Opening Chassis Access Panel (CHS1U-US
Chassis).

Figure 5-101 Opening Chassis Access Panel (CHS1U-US Chassis)

4. Remove chassis access panel from rear of chassis.
5. Remove cabling from retention clips. See
Access Panel

Figure 5-102 Chassis Access Panel Removed

6. Remove two screws securing fan to access cover. Keep
screws for use when installing replacement fan (refer to
5-102 Chassis Access Panel Removed on page
UNIVERGE SV8100/SV8300
Removed.
Installing the SV8300 Chassis
Fan Power Cable Plug
Figure 5-102 Chassis
Figure
5-74).