Specific Node Configurations - Honeywell LC13-510 Manual

2.3 SPECIFIC NODE CONFIGURATIONS

Tables 2-2 and 2-3 show the board configurations for the different types of Dual Node
Module nodes. Table 2-2 shows configurations available in upper, two-slot nodes, and
Table 2-3 shows the configurations available in lower, three-slot nodes.
Table 2-2 — Two-Slot Node Configurations
Application Module
(68020)
Slot Front
2
1 K2LCN
Computer Gateway
(68020)
Slot Front
2 CLI
1 K2LCN
History Module
(68020)
Slot Front
2 SPC
1 K2LCN
Hiway Gateway
(68020)
(See Note 6)
Slot Front
2 DHI
1 K2LCN
Network Gateway (NG)
(68020)
(Note 5)
Slot Front
2 NGI
1 K2LCN
Note 1 Can be used for FOCT, FOCR, LCNE, or LCNE2.
Note 2 Redundant units require Relay Switch Board 51304421-100.
Note 3 Cartridge Disks are optional (via EPDG).
Note 4 The EPNI board is a later version of the PNI board.
Note 5 This Network Gateway configuration can never be expanded to a redundant cable
configuration.
Note 6 HG permitted if the other node is a reduntant HG for another Data Hiway.
Dual Node Module Service
Rear
(Note 1)
KLCNA
Rear
CLI I/O
KLCNA
Rear
SPC I/O
KLCNA
Rear
DHI I/O
KLCNA
Rear
NGIO
KLCNA
2-5
Application Module
(68020)
CE Compliant
Slot Front
2
1 K2LCN
Computer Gateway
(68020)
CE Compliant
Slot Front
2 CLI
1 K2LCN
History Module
(68020)
CE Compliant
Slot Front
2 SPC
1 K2LCN
Hiway Gateway
(68020)
CE Compliant
(See Note 6)
Slot Front
2 DHI
1 K2LCN
Network Gateway (NG)
(68020)
CE Compliant
(Note 5)
Slot Front
2 NGI
1 K2LCN
2.3
Rear
(Note 1)
CLCN-A
Rear
CLI I/O
CLCN-A
Rear
SPC -2
CLCN-A
Rear
DHI
CLCN-A
Rear
NGI
CLCN-A
(Continued)
9/95