Honeywell LC13-510 Manual page 64

replace the K2LCN OR K4LCN*
-1 4 //
replace the K2LCN OR K4LCN*
-1 5 //
replace the K2LCN OR K4LCN*
-1 6 //
-1 7 n
n=(0), (1) check for a duplicate node number; check the BNC connectors;
check/replace the LCN cable; replace the CLCN (KLCNA) or
CLCNA (KLCNB); replace the K2LCN OR K4LCN
n=(2 thru 5) replace the K2LCN OR K4LCN; check/replace the K2LCN OR
K4LCN or LCN in other nodes
n=(6) replace the Winchester (drive or interface)
n=(7 thru 9) reload the node; replace the K2LCN OR K4LCN
n=(other) replace the K2LCN OR K4LCN* or other board in the node that could
be hanging up the bus.
-1 8 n
n=(0 thru 2) replace the EPDG board
n=(3) reload the node; replace the K2LCN OR K4LCN
n=(4,5,8) check for proper release version of the software; reboot the system
n=(9) check/replace the LCN cable; check for proper release version of the
software; replace the K2LCN OR K4LCN
n=(A,C,E,F) suspect the load image - check the software release version and reload
the node
n=(other) replace the K2LCN OR K4LCN*
Dual Node Module Service A-6
A.1
9/95