Functional Description - Makita BV4500-118 Instruction Manual

Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
cartridge.
1
2
Fig.1
1. Red indicator 2. Button 3.
while sliding the button on the front of the cartridge.
CAUTION:
fully until the red indicator cannot be seen.
CAUTION:
forcibly.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
Fig.2
1.
Lighted
3
NOTE:
Tool / battery protection system
5 ENGLISH
Always install the battery cartridge
Do not install the battery cartridge
1
2. Check button
Indicator lamps
Off Blinking
2
-
Remaining
capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
malfunctioned.
-
-