Makita BV4500-118 Instruction Manual page 6

Overload protection
Overheat protection
Overdischarge protection
Switch action
WARNING:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
Fig.3
1. Switch trigger
Control panel
1 2
Fig.4
(1) (2) Button B (3) Button C
(4)
1
3
4
Pulling force adjustment
-
1.
2.
and "999".
NOTICE:
For BV4500-118
To break off a mandrel, set the value to "900" or
higher. When operating the tool without breaking
off a mandrel, set the value appropriate for the
operation.
Adjustment for initial position of
nose piece
1.
2.
switch trigger.
3.
the switch trigger.
and "0".
NOTE:
the tightest and the value "-99" is the loosest.)
4. Release the switch trigger.
Locking the buttons
NOTE:
Lighting up the front lamp
Fig.5
1.
6 ENGLISH
1