Download Print this page

Activesync - Panasonic CF-P1 Series Supplementary Instructions Manual

Supplementary instructions for bluetooth
Hide thumbs Also See for CF-P1 Series:

Advertisement

ActiveSync

Serial Port Type ActiveSync
Setting with the host computer
(1) Refer to the Operating Instructions and conduct steps 1 to 8 to install ActiveSync (
Operating Instructions "Connecting to Your Computer").
After step 8 , at [Set up a Partnership], select [Guest partnership] and follow the on-
screen instructions.
(2) After completing installation of ActiveSync, disconnect the cable.
(3) On the ActiveSync screen, select [File] - [Connection Settings].
(4) Add a checkmark for [Allow serial cable or infrared connection to this COM port:].
(5) Select the same number for the COM port displayed as the following procedure.
Select [start] - [All Programs] - [My Bluetooth Places], then select [Bluetooth] (dis-
played under the title bar) - [Advanced Configuration] - [Local Services] - [Bluetooth
Serial Port].
(6) Restart the host computer.
NOTE
When connecting to CF-P1 with a serial port and without using ActiveSync, remove
the checkmark at step (4).
Setting with the CF-P1
(1) Tap
- [Programs] - [Panasonic Bluetooth] - [My Device] - [My Services].
Be sure to remove the checkmark from [Network Type ActiveSync], and add a
checkmark for [Serial Port Type ActiveSync], then tap [OK].
(2) Tap
on the command bar to return to the previous screen.
(3) Tap
(Refresh Button) on the command bar to search for devices within range.
(4) Tap on the host computer that is going to be connected.
(5) Tap and hold [Bluetooth Serial Port] and tap [Use to connect for ActiveSync].
(6) Enter the PIN code.
After entering the passkey in CF-P1, a message will appear in the host computer,
indicating that Bluetooth PIN code is required. Follow the on-screen instructions in
the message and enter the same code in the host computer.
NOTE
PIN Code
A PIN Code is a password for which you can set up to 16 alphanumeric characters.
When establishing security settings, the PIN Code for the device to be connected
(slave) must be the same as the PIN Code for the device where the connection
originates (master).
(7) Synchronization will start in ActiveSync.
®
9

Advertisement

loading