Panasonic CF-P1 Series Supplementary Instructions Manual
Handheld computer supplementary instructions for wireless lan
Hide thumbs
Also See for CF-P1 Series:
- Service manual (42 pages) ,
- Operating instructions manual (40 pages) ,
- Supplementary instructions manual (16 pages)
Advertisement
Quick Links
Supplementary Instructions
This manual contains supplementary instructions regarding the use of the
computer. This supplementary Instructions manual explains how to get started
with a wireless LAN and point out cases where the operation of the computer
will differ from that in the Operating Instructions.
NOTE
Wireless LAN communications are done via an antenna. Do not shield this antenna
with the hand, etc. This will negatively effect the performance of your wireless LAN
communications.
for Wireless LAN
Model No.
Read Me First ................................................. 2
Connecting to Wireless LAN ........................ 4
Specifications .............................................. 10
The illustration differs in shape, depending on the model.
Handheld Computer
CF-P1Series
Contents
®
Wireless LAN
Antenna
Advertisement
Related Manuals for Panasonic CF-P1 Series
Summary of Contents for Panasonic CF-P1 Series
- Page 1 ® Handheld Computer Supplementary Instructions for Wireless LAN CF-P1Series Model No. This manual contains supplementary instructions regarding the use of the computer. This supplementary Instructions manual explains how to get started with a wireless LAN and point out cases where the operation of the computer will differ from that in the Operating Instructions.
- Page 2 For U.K. Declaration of Conformity (DoC) “Hereby, we and Panasonic Service Europe GmbH (PSE), declares that this Personal Computer is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. Hint: If you want to get a copy of the original DoC of our products which relates to the R&TTE,...
- Page 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the Panasonic Service Center or an experienced radio/TV technician for help. Safety Notice Do not touch or move antenna while the unit is transmitting or receiving.
- Page 4 Connecting to Wireless LAN After finishing the first-time operation, make a connection setting for Wireless LAN using the following procedure. Automatic network detection A connection manager periodically scans wireless networks for available connections. If any networks are detected and no networks are connected yet, the connection manager will try to connect with a more favorable network first.
- Page 5 (3) Tap to display the connectivity bubble. (4) Tap [Settings] to display [Connections] screen* You can also tap - [Settings] - [Connections] tab - [Connections]. (5) Tap [Advanced] tab - [Network Card]. (6) Tap [Wireless] tab. (7) At [Networks to access], select [All Available] or [Only access points].
- Page 6 Connecting to Wireless LAN (9) Tap [Network Key] tab and select [Authentication]. If WEP is enabled: Select [WEP] at [Data Encryption]. Enter the key string in [Network key] and select [Key index], then tap [ok]. If WEP is not enabled: Tap [ok] to return to the previous screen.
- Page 7 Wireless LAN connection is prop- erly established. You can also check on [Network Adapters] tab to check if the IP address obtained from DHCP is cor- rect. (13) Tap [Panasonic Pegasus WLAN CF Module] to see the IP address information.
- Page 8 Connecting to Wireless LAN Peer to peer mode The Peer-to-peer mode is also known as the “Ad-Hoc” mode. There are two ways to con- nect CF-P1 with other devices in the peer-to-peer mode. The first way is to create an Ad- Hoc network on CF-P1, then allow other devices to connect to CF-P1 by joining the net- work.
- Page 9 (3) Type in the network name in [Network name] (CFP1test, for example). Then add a checkmark for [This is a device-to-device (ad-hoc) connection]. Ad-hoc channel is assigned automatically. (4) Tap [ok] to return to the previous screen. (5) Tap and hold the network name and tap [connect]. Connect Remove Settings (6) Now the new ad-hoc network has been created, and it...
- Page 10 Specifications Standards Compliance IEEE802.11b compliant, Frequency 2.4 GHz band Communication Protocol Direct Sequence Spread Spectrum (DS-SS), Half Duplex Frequency Range 2.412-2.462 GHz (1-11ch) Transmission Rate 1, 2, 5.5, 11 Mbps Media Access Protocol CSMA/CA Access Mode Infrastructure mode, Ad-Hoc Security 128/64 Bit WEP and WPA support 802.1x Authentification EAP-PEAP, EAP-TLS...
- Page 11 Memo...
- Page 12 © 2004 Matsushita Electric Industrial Co., LTD. All Rights Reserved. SS0604-0 DFQX5460ZA Printed in Japan...