Cisco CDE 220 Series Hardware Installation Manual page 188

CDE460 Specifications
CDE460 Specifications
Table A-5
Table A-5
Rack Units
Power
AC Power Rating
DC Power Rating
AC Electrical Input
DC Electrical Input
DC Connector Type
Power Connector Cables
Operating Relative Humidity
Nonoperating Relative
Humidity
Operating Temperature
Nonoperating Temperature
Operating Altitude
Dimensions (H x W x D)
Weight (fully configured)
Approvals: Safety
Approvals: EMC
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
A-6
lists the technical specifications and management information for the CDE460.
CDE460 Specifications
4
100 to 240 VAC or –48 VDC redundant power supplies included in
all models
1280 W peak
1010 W peak
•
•
See the
DC input voltage range: –48 VDC to –60 VDC
See also the
page
Molex
Wire cable gauge 10 AWG
8 to 90% (non-condensing)
5 to 95% (non-condensing) at temperatures of 73°F to 104°F (23°C
to 40°C)
50 to 95°F (10 to 35°C)
–104 to 158°F (–40 to 70°C)
0 to 3028 m
7.0 x 17.2 x 26 in. (17.8 x 43.7 x 66.0 cm)
122 lb (55.39 kg)
UL 60950-1, CSA C22.2
FCC Part 15, Industry Canada ICES-003 issue 4, VCCI,
EN55022:2010, CISPR 22:2008, AS/NZS, EN 55024:2010, CISPR
24:2010
AC input voltage low range—Minimum: 100 VAC,
Maximum: 127 VAC
AC input voltage high range—Minimum: 200 VAC,
Maximum: 240 VAC
"If AC Power Supplies Are Installed" section on page
"If DC Power Supplies Are Installed" section on
2-12.
Appendix A Technical Specifications
2-9.