Ethernet Ports - GE Multilin G500 Instruction Manual

CHAPTER 4: INTERFACES

Ethernet Ports

G500 external
Accessories
General cable
requirements
G500 SUBSTATION GATEWAY INSTRUCTION MANUAL
There are six SFP slots available for Ethernet Interfaces at the rear of the G500 unit. Into
each slot an SFP module can be inserted.
For corresponding SFP modules and order codes See "G500 external Accessories" on
page 53.
Inserting an SFP module selects the appropriate transmitter protocol for the
corresponding switch port.
The following SFP modules are supported by G500:
Item Description
580-3784 SFP Module 100BASE-FX LC TRANSCEIVER
OPTICAL
580-3785 SFP Module 1000BASE-SX LC TRANSCEIVER
OPTICAL
580-3786 SFP Module 100/1000BASE-T RJ45
TRANSCEIVER COPPER
The cables required to make physical connections to the G500 are as follows:
Media Designation
Twisted Pair Ethernet 100/1000Base-T
Fiber optic 100BASE-FX
Fiber optic 1000BASE-SX
GE INFORMATION
Manufacturer Mfg Part number
AVAGO
FINISAR
AVAGO
FINISAR
FINISAR
FOXCONN
FOXCONN
Cable
UTP (Unshielded Twisted Pair) – CAT 5
or better
Fiber optic cable multimode
Fiber optic cable multimode
HFBR-57E0APZ
FTLF1217P2BTL
AFCT-5715ALZ
FTLF8519P3BTL
FCLF8522P2BTL
ABCU-5730ARZ
ABCU-5731ARZ
Connector
RJ45
LC
LC
53