Battery Charging; Battery Installation - Honda EB10000 Owner's Manual

Battery Charging

The battery is rated at 28.0 Ah (ampere hours). Charging current should equal
10% of the battery's ampere hour rating.
Battery: 12 V 28.0 Ah (5 HR)
1. Connect the battery charger following the manufacturer's instructions.
2. Charge the battery.
3. Clean the outside of the battery and the battery compartment with a solution
of baking soda and water.

Battery Installation

1. Install the battery into the generator.
2. Install the battery set plate and tighten the flange nuts.
3. Connect the battery positive (+) cable to the battery positive (+) terminal first,
and tighten the bolt securely.
4. Slide the battery boot over the positive (+) cable and terminal.
5. Connect the battery negative (–) cable to the battery negative (–) terminal,
and tighten the bolt securely.
6. Install the cover in the reverse order of removal.
SERVICING YOUR GENERATOR
79