Fuse - Honda EB10000 Owner's Manual

SERVICING YOUR GENERATOR

FUSE

If the fuse is blown, the starter motor won't operate.
In the event of fuse failure, locate the cause of failure and repair it before you
continue operation. If the fuse continues to fail, discontinue generator use and
consult an authorized Honda Power Equipment dealer.
1. Turn the engine switch to the OFF position and remove the key before
checking or replacing the fuse.
BLOWN FUSE
2. Remove the fuse holder cover
and pull the fuse out.
3. Replace the fuse with a fuse of
the same type and rating.
Specified fuse: 5 A, 20 A
Never use a fuse with a different
rating from that specified. Serious
damage to the electrical system or
fire may result.
4. Install the fuse holder cover in the reverse order of removal.
80
20 A FUSE
5 A FUSE
FUSE HOLDER COVER