Technical Data - Sound And Vibration Levels; Technical Data - Fluids; Technical Data - Cutting Deck - Husqvarna P 520D Workshop Manual

Technical Data - Sound and Vibration Levels

Noise emissions (see note 3)
Noise power level, measured dB(A)
Noise power level, guaranteed dB(A)
Noise levels (see note 4)
Noise pressure level at user's ear, dB(A)
Vibration levels (see note 5)
Vibration level in steering wheel, m/s
Vibration level in seat, m/s
Note. 3: Emission of noise to the surroundings measured as sound power (LWA) in accordance with the EU directive 2000/14/EC.
Note. 4: Sound pressure level according to EN 836. Reported data for the noise pressure level has a typical dispersion (standard deviation)
of 1.2 dB(A).
Note. 5: Vibration level according to EN 836. Reported data for the vibration level has a typical dispersion (standard deviation) of 0.2 m/s
(steering wheel) and 0.8 m/s 2

Technical Data - Fluids

Engine oil
Choose oil with viscosity according to the
temperature ranges in the figure. Do not mix different
oil types.

Technical Data - Cutting Deck

Cutting deck
Cutting width, cm/inch
Cutting heights, 7 positions, mm/inch
Blade length, mm/inch
Width, mm/inch
Weight, kg/lb
Bevel gear oil
.
2
2
(seat).
25-127 / 0.98-5.0
SAE 80W/90, capacity 0.4 l
P 520D
Combi 132 Combi 155
102 105
103 105
88 90
1.7 1.7
0.7 0.7
Antifreeze
Only use a glycol based antifreeze that is approved
by the applicable norms BS 6580:1992 or ASTMD
3306-89 or AS 2108-1977 (indicated on the
packaging).
Glycol
60 %
50 %
40 %
Combi 132
132 / 52
490 / 19.3
1340 / 52.8
100 / 220
Technical Data
P 525D
Combi 132 Combi 155
102
103
88
1.7
0.7
Water Freezing point
40 % -47 °C / -53 °F
50 % -37 °C / -35 °F
60 % -25 °C / -13 °F
Combi 155
155 / 61
25-127 / 0.98-5.0
563 / 22.2
1594 / 62.8
131 / 289
SAE 80W/90, capacity 0.4 l
105
105
89
1.7
0.7
2
65
English –