RCA 54-45 Manual page 5

LUGS
Small Solder
(with lock)
Brass
The figure also shows the various head types in which these screws are supplied. Use the type
specified in the particular step.
Washers and nuts are sized in accordance with the diameter of the screws they are used with.
Various types of washers are supplied. A lockwasher may have internal or external teeth. A
flatwasher is made out of flat metal or plastic .
If after having checked all your components against the parts list, you find that you can not
identify or are missing a component, please write us at:
If there is a slight hardware shortage, you can expedite matters by purchasing these pieces at
your local jobber or hardware store.
'
USE THE BEST GRADE OF ROSIN CORE RADIO SOLDER ONLY. UNDER NO CIRCUMSTANCES
SHOULD ACID CORE SOLDER OR ACID FLUX BE USED. The use of acid core solder or acid paste
fluxes can cause serious corrosion and will VOID ALL THE REPAIR AND SERVICE GUARANTEES.
CONSTRUC TION HINTS
The various lengths of wire to be used in this kit are specified in the construction steps . After
cutting the wire to the LENGTH SPECIFIED , strip the insulation 1/4" off each end. The exposed
wire will be used to make the actual connection to the solder lug.
NUTS
Hex
Small Solder
(without lock)
Dept O
RCA Institutes , Inc .
350 West 4th St.
New York, N. Y. 10014
IMPORTANT: PLEASE READ CAREFULLY
Large Tinnerman Small Tinnerman
WASHERS
Lock Flat
4
Fibre
Rubber