Honeywell Fusion4 MSC-L Installation & Operation Manual page 498

5 - 310
Operation - Truck Driver Operations
A Disconnect screen appears where it is expected to disconnect the
permissives like grounding, overfill, and so on.
5.22.3 STOP Key Operations
When the arm is loading the STOP key on the keyboard can be used to
pause the running batches.
After the STOP key is pressed, all the running batches are in a paused
state as seen in the following figure.
Fusion4 MSC-L
Installation & Operation Manual
Part No.: 4418309_Rev09
Honeywell