Cisco TelePresence MX700 Installation Manual page 9

Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
4
Secure floor stand
C
The system must be installed by qualified
personnel, in accordance with state and local
building regulations.
The wall and mounting hardware must be
able to safely support the product.
The wall brackets have two mounting positions.
1
Position the brackets the way that suits your
room the best.
94 mm / 3.70 in.
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
37 mm / 1.46 in.
Side view
Option B:
Use the wall brackets provided to secure the floor stand to the wall
Option A (free standing with feet) is described on the previous page.
Place the floor stand in the wall brackets
2
and move the floor stand and wall brackets
into position. Mark the required screw hole
positions on the wall.
The wall brackets can be fastened through
any of the horizontal slots.
Fasten each wall bracket in a secure manner
ensuring that the wall's structure is sufficient
to support the system (screws/mounting
hardware not provided; not shown in
illustration).
Fasten the floor stand to
3
the wall brackets with the
four screws (provided).
4 × M6x12, pan
Front
Page 9