Cisco TelePresence MX700 Installation Manual page 12
Single camera on a free standing floor stand or a floor stand secured to the wall
Hide thumbs
Also See for TelePresence MX700:
- Reference manual (241 pages) ,
- Administrator's manual (141 pages) ,
- Installation manual (32 pages)
Advertisement
Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
7
Fasten left monitor to floor stand and connect power cable
4 ×
M6x90, countersunk
4 ×
M6x35, countersunk
1
78-100218-03A0 | 2018 JUNE | © 2018 Cisco Systems, Inc. All rights reserved.
Enter four screws from
front and four screws from
underneath. Then, tighten
all screws.
Connect power cable
2
A power cable is strapped at the rear of
the monitor. Connect it to the close-by
socket.
Let the other end hang freely. It will be
connected to the right monitor in step 9.
Page 12
Advertisement
