Cisco ASR 9010 Unpacking And Installing page 84

Installing Optional Air Baffles on the Cisco ASR 9006 Router
Figure 83: Installing the Plenum in a Two-Post 19-Inch Rack
1
2
Step 6 Turn the chassis sideways and slide it into the rack
19-Inch Rack, on page
Step 7
Insert and tighten four customer-supplied rack-mounting screws to secure the support bracket on the chassis
to the front of the rack-post (two on each side). These screws can vary in size and type depending on the rack
that you use. Torque the screws to the weight specified for your particular rack
9006 Router in a Two-Post 19-Inch Rack, on page
Step 8
Insert six 12-24 x 0.5 in.pan-head screws (part number: 48-0523-01) screws to secure the chassis to the
rack-mounted plenum
Unpacking and Installing the Chassis
84
Screw attaching rear-rack
mounting bracket to
plenum (six per bracket)
Rear rack-mounting
bracket
85).
(Figure 84: Securing the ASR 9006 Router in a Two-Post 19-Inch Rack, on page
Unpacking and Installing the Chassis
3
(Figure 84: Securing the ASR 9006 Router in a Two-Post
(Figure 84: Securing the ASR
85).
Screws attaching rear-rack
mounting bracket to rack
(two per bracket)
85).