Cisco ASR 9010 Unpacking And Installing page 82

Hide thumbs Also See for ASR 9010:

Unpacking and Installing the Chassis

Installing Optional Air Baffles on the Cisco ASR 9006 Router

Figure 81: Attaching Plastic Glide Strip to Chassis

Step 3

Install the plenum in the rack. Insert and tighten four customer-supplied screws to secure the plenum to the

front of the rack-post (two on each side). These screws can vary in size and type depending on the rack that

you use. Torque the screws to the weight specified for your particular rack. See

Figure 82: Plenum with

Pre-Installed Front Mounting Brackets, on page 83

and

Figure 83: Installing the Plenum in a Two-Post 19-Inch

Rack, on page

84.

Unpacking and Installing the Chassis

Asr 9906 Asr 9910 Asr 9006 Asr 9904 Asr 9912 Asr 9922