Advertisement
Methods of Installation
①
To install this system, please refer to Figure2 and do the following steps.
1. Fix this system with M8 x L30mm stainless steel bolts(① for installation on the wall or ② for installation on
the floor), Nuts and flat/Spring washers which are supplied.
* The install bolts location of ① can be selected as the install environment of up or down location.
2. ③ Open the capacity of water tank and inject water* until 4L and fit to the case.
* The liquid shall be used an antifreeze to endure below zero temperature
①
②
Figure2.
Standard Method of Installation
-
- 4 -
③
20℃ ~ 0℃.
Advertisement
