Epson Moverio BT-300 Simple Steps

Thank you for purchasing your
Moverio BT-300.
Here are 7 simple steps to get started with your DJI drone.
1
2
3
4
5
6
DJI
7
Note: The DJI GO and DJI GO 4 apps support different drone models.
Please check compatibility before downloading.
Turn the BT-300 on and connect to a Wi-Fi network.
Make sure the BT-300 has the latest firmware installed.
(Apps > Settings > About device > System updates)
Create a Moverio Apps Market account via the pre-installed
app or using a PC on our website.
(https://moverio.epson.com/jsp/pc/pc_login.jsp)
Download and install the DJI GO or DJI GO 4 apps from the
Moverio Apps Market.
Turn on your DJI drone and DJI controller. Remove any cables
connected to your DJI controller and connect the BT-300 handset
to your DJI controller using the micro USB cable provided.
Open the DJI GO or DJI GO 4 app (if prompted,
select 'Just Once') and select
You are now ready to fly!
'Go Fly'.