Fuel Valve Control Program - Siemens LMV51 Series Basic Documentation

Fuel valve
control program
Note on dual-fuel burners
Siemens Building Technologies
HVAC Products
Heavy oil
(direct trafo ignition)
HO
I V1 V2
ts 1
ts 2
Operation
7550f01cE/0200
Gas trains G, Gp1 and Gp2
operation with dual-fuel burners since these fuel trains operate independently.
Oil trains LOgp and HOgp are designed for ignition with a gas pilot. They
must always be combined with a special gas train Gp2 for operation with a
dual-fuel burner.
With Gp2 permitted with
1)
HW 01.C0 and SW V01.40 or higher
Basic Documentation LMV5...
3 Fuel train applications (examples)
**)
Modulating burner
Circulation from Phase 38, max. 45 s
as soon as direct heavy oil start
= ON in Phase 38:
→ Phase change in Phase 40
V3
Multistage operation
1)
can be randomly combined with oil trains LO and HO for
Direct heavy oil start = OFF
at the end of Phase 38
→ Repetition (max. 3 times in total)
CC1P7550en
31/301
13.08.2004