Honda 2007 Acura RL User Manual page 74

2005-08 ACCESSORIES AND EQUIPMENT Navigation System - RL
Return to the XM (HIP) diagnostic menu.

Select the XM (HIP) ECU choice.

Select the Traffic channel choice.

NOTE: Do not touch or select the Data Reset choice.
Do you see real-time traffic on the display?
YES - Return the vehicle to the client.
NO - Go to step 13.
13. Reset the AcuraLink unit:
Make sure you have the anti-theft codes for the audio and navigation system.

Turn the ignition switch to LOCK (0), then pull the back-up fuse from the under-hood

fuse/relay box. For under-hood fuse/relay box location, refer to UNDER-HOOD
FUSE/RELAY BOX article. Wait 2 minutes, then re-install the fuse.
Start the vehicle.

Enter the anti-theft codes for the audio and navigation system.

Left the navigation system boot, then select one of the traffic scales (1/2, 1, 2, or 5 miles).

Park the vehicle outside with a clear view of the southern sky, and verify you are receiving an

XM radio signal (see step 8).
Do you see real-time traffic on the navigation display?
YES - Return the vehicle to the client.
NO - Go to step 14.
14. Substitute a known-good AcuraLink control unit, and retest the vehicle.
Park the vehicle outside with a clear view of the southern sky, and verify you are receiving an XM
radio signal (see step 8).
Do you see real-time traffic on the navigation display?
2007 Acura RL
Confirm the settings:

SID=225

APPID=8

Adjust the setting(s) if necessary as any other setting will prevent

real-time traffic from displaying. Press the cancel button twice to
return to the XM (HIP) diagnostic menu. Select the on-screen
Return button to fully exit the diagnostic mode.
Turn the vehicle off. Wait 20 seconds, and start the vehicle.

Park the vehicle outside with a clear view of the southern sky, and

verify you are receiving an XM radio signal (see step 8).