Advertisement
Top Cover Assembly Kit Instruction, continued
Step
1
Remove AC power to the actuator.
2
Remove the seven screws and separate the extended cover from the actuator case.
See Figure 1. Lay extended cover assembly on a flat surface.
3
Remove seven screws and the top cover from the actuator case. See Figure 1.
Lay top cover assembly on a flat surface.
Page 2 of 5
Top Cover
Assembly
Transformer
Extended Cover
Assembly
Terminal Panel Cover
Figure 1 Top Cover Assembly Location
Table 1 Top Cover Assembly Installation Procedure
Action
Procedure continued on next page ⇒
62-86-33-25
Advertisement
