Guarantee; Technical Specifications - Grizzly GHS 2842 B Translation Of The Original Instructions For Use

GB

Guarantee

• We provide a 24-month guarantee on this
unit. This equipment is not suitable for
commercial use. Commercial use will in-
validate the guarantee.
If you have reason to launch a claim
on guarantee, please call our service
centre. They will give you further infor-
mation on the complaints management
process.
• The guarantee does not cover damage
from natural wear, overloading or improper
use. Certain components, such as the
blade cylinder and pressure plate, are sub-
ject to normal wear and are not covered by
guarantee.
• Guarantee is conditional on adherence to
instructions on cleaning and servicing in-
structions.
• Damage resulting from material or manu-
facturing defects shall be remedied by
replacement or repair free of charge.
• Our service centre will also repair parts not
covered by guarantee for a fee. The serv-
ice centre will be pleased to give you a cost
estimate.
We can only repair equipment with suf-
ficient postage and packaging by the
sender.
• We will not accept bulk consignments,
express or other special freight where
postage has not been paid for.
• We will dispose of your equipment free of
charge.
82

Technical specifications

Silent shredder .......................... GHS 2842B
Nominal power intake ........2800 W
Nominal voltage ......... 220 V-240 V AC, 50 Hz
Safety class ..............................................
Degree of protection ................................ IP24
Branch thickness .......................Max 42 mm**
Collector box content .................... Approx 60 l
Weight ....................................................22 kg
Sound pressure level (L
................................... 82 dB(A); K
Sound power level
Measured (L )
WA
...................................96 dB(A); K
Guaranteed .............................................99 dB(A)
* Continuous-operation periodic duty
(4 min on - 6 min idle)
* * The max. branch thickness that can be chaffed is
dependent on the type of wood and the quality of the
goods being cut.
For hard wood (e.g. oak/beech branches), the max.
branch thickness that can be chaffed is less than for
soft wood (e.g. pine/spruce wood). For dry or knotted
wood, the cutting thickness may also be less.
Do not exceed the maximum permitted net-
work impedance of 0.28 Ohms at the electrical
connection point. The user must ensure that
the device is operated only on a power supply
network that fulfils this requirement.
If necessary, the local power supply company
can be asked for the system impedance.
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
Technical and optical changes can be car-
ried out in the course of further development
without notice. All dimensions, references
and information of this instruction manual are
therefore without guarantee. Legal claims,
which are made on the basis of the instruction
manual, cannot thus be considered as valid.
(S6 40%)*
)
pA
= 3 dB(A)
pA
= 3 dB(A)
wA
II