Operation - Breville Mistic 2 in 1 Connect LTF408 Instruction Book

o

Operation

OPERATING YOUR 2 IN 1 TOWER
FAN & HUMIDIFIER
1. Place the tower fan on a flat surface. Insert
the power plug into a 230V or 240V power
outlet and switch on at the outlet.
2. Touch the button on the control panel
to turn the tower fan on and the front
pivot grille cover will open softly. When
switched on for the first time, the fan will
start automatically on NORMAL mode, at
fan speed 5.
3. The LED display screen will illuminate
and alternate between the room ambient
temperature and current fan setting.
and . will illuminate alternately,
Both
depending on when ambient temperature
is displayed on the LED display screen.
To turn the tower fan off at any time,
touch the button on the control
panel and the front pivot grille cover will
automatically close.
n
NOTE:
• The fan will always operate when turned on.
• The fan cannot be turned off to operate on
humidification only. The humidifier however
can be turned on or off to operate on fan only.
• When the tower fan is ON, Wi-Fi will attempt
to connect automatically. If a connection
has been made, the Wi-Fi symbol will stop
flashing and illuminate. If a connection
is not made, the Wi-Fi symbol will stop
illuminating. See Wi-Fi Connectivity in this
book for more details.
12
LTF408_ANZ_IB_D20.indd 12 LTF408_ANZ_IB_D20.indd 12
• After 15 hours of non-stop operation, the
tower fan will automatically turn off.
• The tower fan is fitted with a power saving
feature. The LED display screen will dim
after 40 seconds if none of the control panel
buttons have been touched. The LED display
screen will re-illuminate if a button on the
control panel is touched.
ROOM AMBIENT TEMPERATURE
Your Breville Mistic 2 in 1™ Connect
Tower Fan & Humidifier is fitted with a
temperature sensor that detects the room
temperature (in °C) which will display
on the LED display screen. The number
displayed is only an indication of the room
temperature and will vary depending on the
location of the fan in the room.
15/7/20 2:14 pm 15/7/20 2:14 pm