Screws; Clips - Honda 08B23-SJC-100 Installation Instructions Manual

16. Pull away the weatherstrip from the B-pillar lower
trim panel. Remove the right seat belt lower
anchor bolt cover and remove the right seat belt
lower anchor bolt. Remove the right B-pillar lower
trim panel by pulling out toward you as shown.
FRONT
RIGHT
B-PILLAR
LOWER
TRIM
PANEL
RIGHT SEAT BELT
LOWER ANCHOR
BOLT
17. Remove the right seat belt upper anchor bolt cover
(four retaining tabs). Remove the right front seat
belt upper anchor bolt.
RETAINING
TABS (2)
Pry out on
both tabs.
SMALL FLAT-TIP
SCREW DRIVER
RIGHT SEAT BELT
UPPER ANCHOR
BOLT COVER
RIGHT SEAT BELT
UPPER ANCHOR BOLT
8 of 24
WEATHERSTRIP
(Pull away.)
LOWER ANCHOR
BOLT COVER
RIGHT SEAT BELT
UPPER ANCHOR
BOLT COVER
RETAINING
FRONT
TABS (2)
18. Remove the right rear grab rail screw covers (two
retaining tabs for each cover). Remove the right
rear grab rail (two screws).
19. Pull away the weatherstrip from the right B-pillar
4D10020H
upper trim panel. Remove the right B-pillar upper
trim panel (two clips).

CLIPS (2)

RIGHT B-PILLAR
UPPER TRIM PANEL
4D10050H
AII 32445 (0605)
B-PILLAR UPPER
TRIM PANEL
FRONT
RETAINING
TABS (2)
WEATHERSTRIP
(Pull away.)
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
RIGHT REAR
GRAB RAIL

SCREWS (2)

SCREW
COVERS (2)
4D10060H
FRONT
4D10030H