Honda 08B23-SJC-100 Installation Instructions Manual page 10

24. Open the console pocket lid and remove the four
bolts. Unplug two vehicle connectors, and remove
the roof console.
BOLT
25. Remove the sunvisor holders by rotating them
clockwise.
SUNVISOR
HOLDERS (2)
10 of 24
VEHICLE
CONNECTOR
ROOF
CONSOLE
CONSOLE
POCKET
4216050K
4217011K
FLAT-TIP
SCREWDRIVER
AII 32445 (0605)
26. Remove the right sunvisor screw cover (four
retaining tabs), and remove the right sunvisor (two
torx screws and unplug the vehicle connector).
VEHICLE
CONNECTOR
RIGHT
SUNVISOR
27. Using scissors, cut out the marked area from the
template (without sunroof).
Cut out areas.
MASKING
TAPE
FRONT
HEADLINER
28. Position the template on the headliner and align
the cutout with the rear interior light and roof
console opening. Tape the template to the
headliner using strips of masking tape.
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
RETAINING
TABS (4)
SUNVISOR
SCREW
COVER
T25
TORX
SCREW
TEMPLATE
(without sunroof)
REAR
INTERIOR
LIGHT
TEMPLATE
ROOF
Align the
CONSOLE
template with
OPENING
the lines.
4703051T
4913053H