Honda 08B23-SJC-100 Installation Instructions Manual page 22

83. Secure the FM modulator bracket to the FM
modulator with one 5 x 8 mm washer-screw
(included with the monitor kit).
FM
MODULATOR
84. Set the FM modulator switch at 88.5. Using
isopropyl alcohol on a shop towel, clean the area
where the EPT sealer will attach. Using scissors,
cut one EPT sealer in half. Secure the FM
modulator cables to the FM modulator with one
EPT sealer half.
SWITCH
FM
MODULATOR
FM
MODULATOR
CABLE
22 of 24
FM
MODULATOR
BRACKET
5 x 8 mm
WASHER-SCREW
(Included in the
monitor kit.)
4917021M
EPT SEALER
Cut in half.
4917052M
AII 32445 (0605)
85. Using isopropyl alcohol on a shop towel, clean the
area where the EPT sealer will attach. Attach one
EPT sealer half that you cut into two in step 84 to
the audio unit.
86. Remove two screws from the audio unit/navigation
unit. Secure the FM modulator bracket to the
audio unit with the two screws you removed.
FM
MODULATOR
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
AUDIO UNIT
EPT SEALER
Cut in half in
4917030M
step 84.
AUDIO UNIT
FM
MODULATOR
BRACKET
SCREW
4917060M