Specifications; Camera Unit; Head Unit (Pan-Tilt Section) - Canon BU-47H 1AM Operation Manual

Remote control pan-tilt head
Hide thumbs Also See for BU-47H 1AM:
Table of Contents

Advertisement

3. Specifications

3-1. Camera unit

Imaging sensor
Mounted camera
Focusing system
IRIS
Image stabilizer
Shutter speed
Gain
White balance
ND filter
Picture quality adjustment

3-2. Head unit (Pan-tilt section)

Ambient operating conditions
Wind speed resistance
Control system
Units controlled
Power supply
Wiper
MIC input
Washer
Pan-tilt head operations
Shot operations
Stopping accuracy
Dustproof and waterproof
performance
Acoustic noise
Control cable
Receptacle
Video output
GENLOCK input
Pan-tilt head securing
Dimensions
Mass
1/3 type, 3CMOS, Effective pixels: 2.07 megapixels
4.1 to 73.8 mm F1.6 to 2.8, 7.4 to 134 mm (2/3" equivalent)
18x optical zoom, digital extender (x1.5)
AUTO, MANUAL
AUTO, MANUAL
Optical shift type
Model
Signal
BU-47H 1AM
NTSC
BU-47H 2AM
AUTO, 0, +6, +12, +18, +33dB
AUTO, Set
1/1, 1/4, 1/16, 1/64 (four-positions)
Master pedestal, R-Gain, B-Gain, R-BLK, B-BLK
Temperature: -15 to +40°C, Humidity: 90%RH or less (non-condensing)
0 to 25 m/s: Operate normally, 25 to 35 m/s: Operable, 35 to 60 m/s: Not destroyed
Digital control
Pan-tilt head, lens and camera are controlled by means of commands from the
operation unit.
10.5 to 15 VDC, 80 W
Power of two or three times the rating 80 W may be consumed during power-on,
so select a power supply with specifications that prevent a power failure.
Provided
Provided (Pedestal section)
Control terminal provided (Pedestal section)
Panning
Tilting
Pan/tilt/zoom/focus
Less than 10' for both pan and tilt operations
IP45
NC55 or less
RS-422 cable (Depending on the system configuration, other unit or cable may be
required.)
DC, control (RS-422), SDI output, VBS output, SYNC input, AUX
• HD-SDI/SD-SDI (embedded audio) output, BNC1 system (receptacle section)
* HD-SDI and SD-SDI outputs are switched by the internal setting. For details,
please contact your Canon dealer.
• SD composite output, BNC1 system (receptacle section)
BNC1 system (tri-value/BB)
Mounted with four M8 bolts
Refer to the external view.
Approx. 17 kg (including the camera, excluding the optional units)
Frame rate
60i
PAL
50i
Operation angle
-170° to +170°±5°
-50° to +30°±5°
E11
Shutter speed
1/4, 1/15, 1/60, 1/100, 1/1000
1/3, 1/12, 1/50, 1/100, 1/1000
Operation speed
0.5°/s to 25°/s
0.3°/s to 20°/s

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bu-47h 2am

Table of Contents