Canon BU-47H 1AM Operation Manual page 20

This device complies with Part 15B of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15B of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the
equipment.
We, Canon Inc., in Japan and CANON EUROPE LTD., in U.K., confirm that the Remote pan-tilt head
BU-47H is in conformity with the essential requirements of EC Directive(s) by applying the following
standards
EN55032 and EN55103-2
Note:
a) Applicable Electromagnetic Environments:
E-1 (residential), E-2 (commercial and light industrial), E-3 (urban outdoors) and E4
(controlled EMC environment, ex. TV studio).
b) Use of shielded cable is required to comply with limits specified by above standards.
c) Use of ferrite core is required to comply with limits specified by above standards.
Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts- und Gewerbebereich sowie in
Kleinbetrieben vorgesehen.
Only for European Union and EEA (Norway, Iceland, and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste,
according to the WEEE Directive (2012/19/EU) and national legislation. This product should be
handed over to a designated collection point, e.g., on an authorized one-for-one basis when
you buy a new similar product or to an authorized collection site for recycling waste electrical
and electronic equipment (EEE). Improper handling of this type of waste could have a possible
negative impact on the environment and human health due to potentially hazardous substances
that are generally associated with EEE. At the same time, your cooperation in the correct
disposal of this product will contribute to the effective usage of natural resources. For more
information about where you can drop off your waste equipment for recycling, please contact
your local city office, waste authority, approved WEEE scheme or your household waste disposal service.
For more information regarding return and recycling of WEEE products, please visit
www.canon-europe.com/weee.
FCC REGULATIONS
Canadian Radio Interface Regulations
CAN ICES-3(A) / NMB-3(A)
KCC-REM-CIN-BU-47H