Canon BU-47H 1AM Operation Manual page 26

WARNING
1. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
2. Do not allow the pan-tilt head or the inside of the housing to become wet, and do not allow
water to enter inside or to be spilled onto the head. Do not put any object which contains liquid
such as a drink or a vase on this product. If water has found its way inside the unit, stop using it
immediately. Continuing to use the unit is a fire or electric shock hazard.
3. Do not attempt to disassemble or remodel the unit. High-voltage parts and intermeshing gears
are to be found inside the unit, and contact with them may cause injury.
4. Do not drop the unit, bump into other objects or otherwise subject it to strong impact. If the main
unit has been damaged, disconnect the power cord from the input connectors. Then contact your
dealer or your Canon representative.
5. Please do not turn the lens toward the sun. When a strong light enters at the TELE side, it can
cause damage to the lens and the camera.
6. When operating this device, please use a control device such as an operation unit. When
panning or tilting by hand or other methods, it can cause damage to this device.
CAUTION
1. Make sure that all the mountings are tightened securely.
A loose mounting may cause the unit to fall down, possibly resulting in injury.
2. Periodically (every 6 months to a year as a general rule) inspect the mountings for looseness. A
loose mounting may cause the unit to fall down, possibly resulting in injury.
HANDLING THE UNIT
E6