Sony SIR-1000W Instruction Manual page 93

Status Commands
When a status request is received from a host computer, the recorder sends back the
following setting value or status contents:
Command
Tape ADDRESS
ADR?
ALM? Alarm status
AUX? Front panel status
BAR? Bar meter setting readout
BAT? Battery status
CAL? Calibration status
CHA? Channel mode setting readout
CFG? Recorder configuration
Command check
CMD?
ERR? Error check
FMT? Tape formatting execution status
IDS? Tape ID number readout
INP? Input format setting and reading
LSB digital channel read
LCH?
LVA? Signal level read (text format)
LVB? Signal level read (binary format)
MAP? Slave ID read
MEM? Memo character string readout
Tape transport mode readout
MOD?
MON? Monitor channel setting readout
OFA? Auto offset setting status
OFS? DC offset value readout
OPL? Output level setting readout
PNL? Panel lock status readout
PSV? Power-save status
RNA? Auto range setting status readout
Range setting value readout
RNG?
RPT? Auto repeat status readout
SCH? Search status
SLF? Self-check status
SPD? Tape speed readout
Speaker source selection status
SPO?
STA? Status A
TIM? Real-time clock readout
TOC? TOC data readout
TRG? Trigger mode setting status
Terminator selection status (returned strings)
TRM?
TSG? Test signal selection status
UTL? Utility mode setting readout
Tape volume readout
VOL?
Function Comments
SIR-1000i only
SIR-1000W only
12-3