Makita DCL184 Instruction Manual page 7

3. Place the dust stopper and the dust bag together into the
cleaner cavity in the same direction of arrow on the dust stop-
per. Insert them all the way into the slots in the cleaner cavity.
1
► 1. Slot
4. Place the entire cloth part of the dust bag inside
the cleaner itself.
5. Close the dust case cover completely.
1
► 1. Dust case cover
NOTE: When the dust bag is not installed in
the cleaner, the dust case cover does not close
completely.
Installing the paper filter
Use the dust stopper also when installing paper filter.
Be careful not to take the upper side for the lower side
by mistake because they are different each other.
1
2
► 1. Upper side of the dust stopper 2. Lower side of
the dust stopper
1. Unfold the entrance of the paper filter before
setting it on the dust stopper.
2. Insert the protrusion of the paper filter into the
groove on the dust stopper as shown in the figure.
The paper filter does not have distinction between the
upper and lower sides. You can insert its protrusion of
either side into the groove of the dust stopper.
2
► 1. Dust stopper 2. Groove 3. Paper filter
7 ENGLISH
1
2
1
3