Makita DCL184 Instruction Manual page 11

Cordless cleaner
Hide thumbs Also See for DCL184:
Table of Contents

Advertisement

Disposing of dust
CAUTION:
Empty the dust bag or replace the
paper filter before it becomes full. If not, the suc-
tion/blowing force weakens.
CAUTION:
When closing the dust case cover,
be careful not to pinch your fingers.
NOTICE:
Never throw away the dust stopper
because it should be used whenever either the
dust bag or the paper filter is used.
NOTICE:
When the dust bag/paper filter is not
inside of the cleaner, the dust case cover does
not close completely. Do not force to close the
dust case cover. It may result in deforming or
breakage of the tool.
NOTICE:
When disposing of dust, also clean the
room for the dust bag/paper filter. The remaining
dust and dirt in the room may cause the sponge filter
to be clogged or the motor to be damaged.
1.
Open the dust case cover.
1
► 1. Dust case cover
2.
Pull out both the orange-colored dust stopper and
dust bag/paper filter together at the same time.
► 1. Dust stopper
3.
When using the dust bag
Remove the dust stopper and empty the dust bag.
1
► 1. Dust stopper 2. Dust bag
When using the paper filter
Remove the dust stopper and dispose of the paper filter.
1
► 1. Dust stopper 2. Paper filter
4.
Place the dust bag/new paper filter and dust stop-
per together into the cleaner and close the dust case
cover.
Using as a blower
CAUTION:
1
in the vicinity.
CAUTION:
ommended to open the windows, and also wear
protective goggles and mask while operating.
CAUTION:
It may come off from the cleaner.
CAUTION:
air into objects, like rubber rafting, balls or other
inflatable products. Increased motor revolution may
cause dangerous fan breakage.
CAUTION:
blower outlet. Be careful not to block suction inlet or
blower outlet with dust or dirt when operating in dusty
area.
CAUTION:
nozzles provided by Makita.
11 ENGLISH
Never point the nozzle at anyone
To prevent inhaling dust, it is rec-
Do not pull the blower attachment.
Do not use the cleaner for blowing
Never block suction inlet and/or
Do not use nozzles other than the
2
2

Advertisement

Table of Contents
loading

Table of Contents