10.1 Introduction
Display
Operating temperature
Storage
temperature
Ingress Protection
Humidity
Shock/Vibration
EMC
Electrical safety
Pressure safety
Approved
Battery power
[EN] English - K0449
Chapter 10: General specification
For a full specification of the DPI 620 calibrator and its related
accessories (MC 620 carrier, PM 620 module, and
PV 62x pressure stations) refer to the datasheet supplied on
the CD (CD: P/N UD-0002).
Table 10-1: General specification
LCD: Colour display with touch-screen
-10 to 50°C (14 to 122°F)
-20 to 70°C (-4 to 158°F)
IP65 (DPI 620 calibrator only)
0 to 90% relative humidity (RH) non-condensing
Def Stan 66-31, 8.4 cat III
Electromagnetic compatibility: BS EN 61326-1:2006
Electrical - BS EN 61010:2001
Pressure Equipment Directive - Class: Sound Engineering Practice
(SEP)
CE Marked
Lithium-Polymer battery (GE Part number: 191-356)
Capacity: 5040 mAh (minimum), 5280 mAh (typical); Nominal voltage:
3.7 V.
Charge temperature: 0 to 40°C (32 to 104°F)
When the instrument senses the temperature is outside this range, it
stops charging.
Discharge temperature: -10 to 50°C (14 to 122°F).
Charge/discharge cycles: > 500 > 70% capacity
General specification 10-1