System Presentation; Brief Description Ipc 40.2; Fig. 1-1: Ipc 40.2 With 3 Slot Box - Bosch Rexroth IPC 40.2 Project Planning Manual

IPC 40.2
1

System Presentation

1.1

Brief Description IPC 40.2

DOK-SUPPL*-IPC*40.2***-PR02-EN-P
The IPC 40.2 is an industrial PC, that represents in combination with a
display VDP 16.1, VDP 40.1 or VDP 60.1 a PC-based operator terminal,
and that can – depending on the application or configuration – also
perform control functionalities.
Fig. 1-1: IPC 40.2 with 3 slot box
The IPC 40.2 is connected with the operator panel interface GIGASTAR
of the display VDP 16.1, VDP 40.1 or VDP 60.1 via a cable with a length
of up to 30 m . Thus, the IPC 40.2 can be installed in the control cabinet
and the display in its door or at the machine.
As an alternative, the IPC 40.2 can also be equipped with a GIGABIT
interface to connect the Rexroth operator panels BF 312T and BF 315T
or a GIGABIT3 interface to connect the displays BTT 16.1 or BTT 40.1.
The IPC 40.2 consists of two tightly connected parts:
• The PC box contains the PC including the hard disk and the power
supply unit with uninterruptible power supply. Depending on the variant
the PC box provides three or four slots. The standard interface and
some special interfaces are available on a plugboard.
• The serial GIGABIT, GIGABIT3 or GIGASTAR operator panel
interface as well as an RS422 interface (X39) used as alternative to
the 24 V interface XCOM1 are integrated in the second housing part
mounted on the PC box. Furthermore, five light-emitting diodes to
display device states and errors are arranged on this housing. Also,
the optionally available CD ROM drive or the CD RW distiller are
mounted here.
1-1
System Presentation
IPC_40_2.tif