Makita GD0603 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1 Spindle, Armature
DISASSEMBLING
(1) For disassembling Housing set, remove Cap. Fig. 2
Fig. 2
(11)
(9)
(10)
(9)
(1)
(30)
1. Fix Spindle (11) with wrench 10.
2. Unscrew Collet nut 6 (9) by turning Wrench 10 counterclockwise.
Wrench 10
3. Remove Collet cone (10).
4. Pull off Hanger (37) from Housing set R (1) side.
(30)
(37)
(29)
5A. If it is difficult to pull off Cap (30) by hand, insert Slotted
head screwdriver into the gap between Cap (30) and Housing
set (1)/(31) and twist it.
gap between (30) and (1)/(31)
5. Pull off Cap (30) by unscrewing
two 3x16 Tapping screws (29).
P 3/ 14